Graph view
The graph view displays the data uploaded to IrriMAX Live from one or more loggers. You can scroll through the data and zoom in and out. The vertical range shown is automatically scaled to fit the extents of the data shown.
From here you can customize the presentation of the data, and access the properties of the logger database.
- Some actions will place the graph view into a different mode, during which the navigation bar turns yellow and displays instructions. To exit the mode, click the X button at the far-right of the top strip.
- It is possible to have multiple panes on the graph, but some actions apply only to the bottom pane.
- You can expand a pane on a multiple-pane graph to fill the whole view by clicking the line legend at the top of the pane.
Shortcuts
These hidden shortcuts allow you to perform certain actions quicker.
- View the next graph in the same folder by clicking the graph name in the navigation bar. Hold the Shift key while clicking to view the previous graph.
- View the next expanded pane on a multiple-pane graph by clicking the pane name in the navigation bar. Hold the Shift key while clicking to view the previous pane.
- Zoom in on a point by clicking the graph image
- Zoom out by clicking the horizontal time axis
- Scroll 3/4 of a page to the left by clicking the left vertical axis
- Scroll 3/4 of a page to the right by clicking the right vertical axis
- Zoom to a rectangle by drag-selecting within a pane on the graph image (desktop browsers only)
- Use the pinch gesture to zoom in and out horizontally (touch devices only)
- Use the swipe gesture to scroll horizontally (touch devices only)
- Right-click or long-press a comment icon to edit or delete it without being in comment-editing mode. Double-click also works in all browsers except iOS Safari.
Popup menus
These menus are accessed by a click of the right mouse button, or a long touch without moving your finger.
- Use the popup menu on the graph image to place a ruler, add a comment and perform a selection of other operations from the Graph and Edit menus
- Use the popup menu on the horizontal time axis to select from different zoom levels
- Use the popup menu on the vertical axes to scroll back or forward by a choice of amounts
- Use the popup menu on the legend at the top of a pane to replace, move, hide, reveal or remove that pane
The Zoom menu
The Zoom menu appears at the far-right of the navigation bar. Its name changes depending on the current time range, for example 14 days or All data. When you change the time range, it is remembered for your current session. You can nominate your preferred time range in your user settings.
- Scroll buttons
At the top of the Zoom menu are buttons for scrolling left and right, and scrolling to the end of the data. The '...' button is used to scroll to a specific time.
- Undo zoom
This will restore the displayed time range to the way it was before your last zoom operation.
- Zoom options
Choose any of the listed zoom options to change the horizontal magnification. The graph will attempt to remain centered on the same point, but sometimes this isn't possible. The All data option can show a maximum of 2 years.
The Graph menu
Choose actions from the Graph menu to modify the layout of panes or download data.
Note that some of these actions might be missing, depending on the permissions granted to you by your manager.
- Place rulers
Switch the graph into a mode that enables you to click on the graph to place temporary vertical rulers, which display the values at the times you click. While in this mode you can remove all rulers by choosing Clear in the navigation bar.
- 2D image
If you have two or more loggers installed side-by-side, you can display moisture, salinity or temperature in an isometric-style view of a vertical slice of soil. To set up your 2D image, first create a pane for each logger, then choose this option.
If you have already set up the image, the graph will switch to a mode that enables you to click on the graph to display the 2D image at that time.
- Replace graph
Replace this graph with a completely new graph, retaining the current name and using the logger database currently in the bottom pane. All secondary panes will be discarded, as will comments, budget lines, growth stages etc.
- Replace pane
Click on a pane to replace it, making a new selection of sensors from the same logger database. All comments, budget lines, growth stages etc will be discarded.
- Add pane
Allows you to select sensors from any logger database you have access to, and graph them in a new pane, stacked on top of all existing panes.
- Move pane
Click on a pane to move, then click on the pane currently occupying the position that you wish to move it to. If the move would result in a change of logger database in the bottom pane, it will not be permitted.
- Hide/reveal pane
Hide the clicked pane by replacing it with just a header, or click a hidden pane's header to reveal the pane again.
- Remove pane
Click on a pane to remove it from the graph. You can only remove the bottom pane if the pane above it shares the same logger database.
- Change pane heights
Expand the height of a pane by clicking it, or set all panes to the same height.
- Copy pane
Copy a pane from the graph. You can paste this copied pane as a new pane on another graph, or paste the budget lines and growth stages on another existing pane.
- Paste pane
Paste your copied pane as a new pane on the current graph.
- Paste budget lines
Paste the budget line values and growth stages from your copied pane into an existing pane on the graph (replacing any existing budget lines and growth stages.)
- Download graph PDF
Create and download a PDF file of the graph showing the current time range. (Not available on mobile devices.)
- Download graphed values
Create a CSV containing the values as displayed in the chosen graph pane. The values will reflect the chosen unit, calibration, bar sample interval and any other manipulation performed by the graph. If Event Detection has been run on the pane you will receive the event data. (Not available on mobile devices.)
- Extract comments
Extract and display all comments from the graph, then allow download as a CSV file. (CSV download is not available on mobile devices.)
- Download package
Creates a package containing the graph and the underlying logger databases. This package can be downloaded and opened in the IrriMAX desktop software (version 9.1 or later.) (Not available on mobile devices.)
- Upload IrriMAX graph
If you have downloaded this graph to the IrriMAX desktop software and modified it there, then you can select this option to upload your changes. The current graph will be replaced with the graph you upload. The filename and internal signature of the logger database in the bottom pane must match the original on IrriMAX Live. (Not available on mobile devices.)
The Pane menu
The Pane menu replaces the Graph menu when a pane on a multiple-pane graph is expanded to fill the entire view. It contains a subset of actions found on the Graph menu.
The Edit menu
Choose actions from the Edit menu to modify the display of existing graph panes.
Note that some of these actions might be missing, depending on the permissions granted to you by your manager.
- Edit comments
Switch the graph into comment-editing mode. Click a graphed line to attach a comment at the point you clicked. Click away from any lines to attach a time-based comment at the bottom of the pane you clicked in. Click an existing comment to edit or delete it. Click "Main Comment" to create, edit or delete the main comment for the graph. The icon for the main comment is displayed in the top-left corner of the window, under the navigation bar. You can also click this icon at any time to edit or delete the main comment.
- Adaptive Irrigation Guide
Automatically set the full and stress budget lines based on root activity in the growth stage or the last 90 days. If the data is insufficient, optionally fall back to placeholder budget lines by supplying your soil type. See Adaptive Irrigation Guide
- Set full line
Switch the graph into a mode that enables you to click within a pane to set the Full budget line, or choose Clear to remove it. If your graph contains Growth Stages, be sure to click within the correct stage. When you have set a Full line, IrriMAX Live will automatically generate an alert if the last reading is above the line.
If the Stress line is already set, you have the option to simultaneously set the Refill line to a percentage distance between Stress and Full.
- Set refill line
Set the Refill budget line in the clicked pane. An alert will automatically be generated if the last value is below this line. If the Stress and Full lines are already set, you have the option to set the Refill line to a percentage distance between them.
- Set stress line
Set the Stress budget line in the clicked pane. An alert will automatically be generated if the last value is below this line. If the Full line is already set, you have the option to simultaneously set the Refill line to a percentage distance between Stress and Full.
If your summed graph has an associated daily ET pane, IrriMAX can detect the onset of stress. Your click on the pane sets the starting date for detection. Check the box "Detect using ET". You can alter the sampling period used for establishing the CWU-ET relationship, and adjust the sensitivity. Detection stops at the end of the growth stage. If successful, the Stress budget line is set and a comment is added which explains the reasoning.
- Set line 1
Set or clear the value of the first user-defined budget line in the clicked pane.
- Set line 2
Set or clear the value of the second user-defined budget line in the clicked pane.
- Add growth stage
A growth stage is a labeled time from which a different set of budget line values can be set. Select this action to create a new Growth Stage in the clicked pane. You can also choose to add a pre-defined set of growth stages, offset from the time you select. You can edit these sets by choosing "Growth stage sets" from the main menu.
- Remove growth stage
Click within a growth stage to remove it from the graph.
- Edit growth stages
Edit the start times and names of existing growth stages, add or remove stages, and copy existing growth stages while offsetting the start times.
- Move growth stage (popup menu only)
Use the popup menu within a growth stage and choose this action to change the start time.
- Event detection
Turns on continuous detection and highlighting of different events in the root zone. You will be prompted to click on a soil moisture pane (if there is more than one pane) and then you can choose from the following:
- Root activity
IrriMAX will scan each day for the distinctive 'stepping' shape associated with crop water uptake during daylight hours. Each detected step is highlighted by an oval shape in a lighter shade of the graph line color, or by a vertical band if the pane is summed or shows only a single sensor.
Events with a soil water content drop of less than 0.25 millimeters per sensor are filtered out. If necessary, you can change this threshold to suit your data.
- Crop water use
This is an alternative output from root activity detection on a summed soil moisture pane. Crop water use (with drainage compensation) is presented as daily bars. On days where root activity can't be detected, the bars will be missing.
- ETSI
This is an alternative output when Crop Water Use is chosen and an ET pane with daily bars exists on the graph. Evapotranspiration Stress Index (ETSI = ET / Crop water use) is presented as daily bars. The ETSI value is proportional to crop stress.
- Irrigation
IrriMAX will attempt to detect and highlight the propagation of irrigation events through the root zone. Each detected irrigation is highlighted by overlapping blue parabolic shapes descending from the top of the pane, or by a vertical band if the pane is summed or shows only a single sensor. For an event to be classified as an irrigation, the rate of soil moisture increase must be significant. It must register at the top sensor and extend continuously downward without missing a sensor.
The default required rate of soil water content increase per sensor is 0.4 millimeters per hour. If necessary, you can change this threshold to suit your data.
- Irrigation and root activity
This will highlight both irrigation and root activity on the same pane, as described above.
- Irrigation analysis
This view detects irrigation and root activity as above, then presents a display that attempts to indicate the effectiveness of each irrigation according to how deep in the root zone it propagated. Irrigation events are marked with red for "not enough", blue for "too much" and green for "just right."
The display is aggregated into days, with sensor depth on the Y-axis. Coloured horizontal bands show days with root activity, and extend for a further 7 days before roots are considered to be inactive. The number of days can be changed to suit your data if necessary.
Irrigations are shown as descending blue parabolic shapes, with an image of roots overlaid, and the red, green or blue classification at the top.
- Stress
Analyses crop water use (CWU) in conjunction with evapotranspiration (ET) to identify days when CWU is significantly less than expected for the conditions. These days are highlighted with a vertical bar, colored red if too dry or blue if waterlogged (heavy clay only.)
You can control the sampling period (the default is 14 days prior to each day in question) and the deviation (the default is 1.0 standard deviations from the line of CWU versus ET over the sampling period), with smaller values being more sensitive.
"Suggest budget lines" will draw horizontal lines originating from stress days to indicate where the budget lines could be placed.
"Show continuing stress" shows the stress days following the initial day as lighter-colored bands.
"Show root activity" will highlight all non-stress days where there is root activity with a gray band.
"Detect waterlogged (heavy clay only)" will treat stress following an irrigation as waterlogged and highlight these events in blue. This option is only valid for heavy clay soil types.
"Ignore days with irrigation or rainfall in another pane" will exclude days that have the potential to interfere with the stress detection algorithm, if you have the extra rainfall or irrigation data.
- Clear
Click the Clear button to turn off event detection for the pane.
If you choose Event detection on a V.I.C. pane, you will get the VIC Filter (see below.)
- Event report (popup menu only)
Use the popup menu on a pane with event detection to view the detected values and download them in CSV format.
Note that the values will not exactly match what you can measure on screen with rulers. Root activity values have been adjusted to compensate for drainage. The data has also been processed by a smoothing algorithm to minimize false positives for irrigation and wetting, causing peaks to be rounded and leading to possible under-reporting. Under-reporting is inevitable anyway, due to peak readings falling in the time interval between samples. A shorter sampling interval gives more accurate results.
- VIC filter (popup menu only)
Use this function on a V.I.C. (Volumetric Ion Content) pane to graph only those points where the corresponding moisture sensor is reading a specified value.
- Data adjustment
Enables you to change the calibration or compensate for temperature effects on a Soil Water Content or VIC pane. Allows filtering of displayed values above or below nominated thresholds.
Note that to change calibration, the calibrations stored against the sensors in the logger database must be accurate. This means they must be explicitly defined, or if undefined, the probe must have calculated the values using the Default Sentek Calibration.
- Properties
Convert to a customized unit of measure and specify the legend text on any pane. Change the colors of the lines or bars. On non-stacked panes, change the region colors and budget line names.
The Logger menu
Choose actions from the Logger menu to view or modify the properties of the logger database from which the graphed data is sourced. These properties are linked to the logger, and are accessible from any graph based on the logger.
If your graph has multiple panes which show data from more than one logger, you may be prompted to click on a pane to identify the logger. If you are not prompted, the action will apply only to the logger that is graphed in the bottom pane.
Note that some of these actions might be missing, depending on the permissions granted to you by your manager.
- Installation details
Edit details relating to the installation of the logger. You can also edit the Zone records that contain details common to a group of loggers, and link a Zone to the logger.
- Satellite imagery
Click on a pane to view satellite imagery for the logger at a particular time. The logger must be located within a Zone for which you have a satellite imagery subscription.
- Report a fault
Flag the logger as having a fault and notify the person responsible for servicing your equipment.
- Location
View or set the Google Maps location of the logger. You can drag and drop, search for a location, or enter the latitude and longitude directly.
- Weather...
Go to meteoblue to view the current conditions for the location of the logger.
- Navigate...
Go to Google Maps to navigate from your current location to the location of the logger.
- Photos
View, upload or delete your photographs of the logger installation.
- Set logger data start
The logger database might contain unwanted data at the start. This feature allows you to define the start of valid data for the database, without actually deleting the readings from the database. This affects every graph with that logger in the primary pane. A checkmark will appear next to the menu item if this feature is in effect. Select the item again and Clear data start will appear in the navigation bar.
- Assign to user
If you have access to a logger database, you can assign it to another user and give them access as well. It will appear in their Loggers folder as if it were their own, but they won't be billed for it.
- Download CSV
Download the entire contents of the logger database in standard CSV format, suitable for opening in Excel. These are the original database values, not including any manipulation by the graph. (Not available on mobile devices.)
- Trim readings
To permanently trim readings from the start or end of a logger database, click the time from which to trim, then choose to delete either the earlier or later readings. To trim data from the middle of a logger database, drag a rectangle to mark the range to trim.
- Archive older data
Move all data in the logger database older than a nominated time to an archive. See Archiving old data.
- Upload database
Update the graphed logger database by supplying an IrriMAX database (SDB file), an IrriMAX-format CSV file or a special Excel worksheet. You can choose to append, prepend or replace readings. If prepending or replacing, your uploaded file must have an identical sensor configuration and logger ID. (Not available on mobile devices.)